Teknomec

The TEKNO-MEC, NATIONAL Fair, with the partecipation of a big number of Foreigner Companies, present itself to the operators with its 7th edition 2011 from May 20th to 22nd in Lanciano (CH).

After receiving the prestigious award of National Fair, Teknomec is ready to the award of International Fair, completely supported by the presence of foreign exhibitors, demonstrating the good work done in these years and the growing satisfaction and interest both exhibiting companies and operators.

TEKNOMEC has made it selfknow as a reference for the Centre-South of Italy in supporting a good contest between supply and demand, capturing the attention of about 6.500 visitors about the edition 2009.

A great opportunity to make a display of machine-tools, robotics, welding systems, sub-supplies and garanteed second-hand machinery.

From www.teknomec.it it is possible to find more information about the event.

Bending a spiral

Hi, i recently found this nice article about how to make a spiral staircase using a tube bending machine.

For stair handrails it is advised to use a box section, for instance a semi-circular profile.

Start by setting up the machine measuring the radius of your staircase: the machine uses a series of drive rollers that are set out to achieve a degree of pipe bend required.

The pipe is pulled through these angle rolls and then made into an arc.

Here you can find more about his article:
http://www.mustknowhow.com/index.php/mustknowhow/how-to-bend-handrails-for-spiral-staircase

A tubin benders blog

I found another nice blog about tubing Benders, Pipe Benders, Tube Benders, Piping Benders, Pipe bending and tube bending!

Check it out: http://tubingbender.blogspot.com/

Timtos 2011 Machine Tool Show

The Taipei International Machine Tool Show is featured out as a leading machinery fairs and is titled as vigorous machine tools fair in India.
Organized by Taiwan External Trade Development Council (TAITRA), the event is held at Taipei World Trade Center(TWTC), Taipei, Taiwan.
It is worldwide preferable event for sourcing machine tools, welding & cutting equipment, metal forming machinery, industrial robots, etc.

Comparing bending machines prices

I found this interesting site were you can see a wide selection of products and can easily compare prices and features, which is a good way of evaluating the right choice before making a purchase.
Obviously, we focused on bending machines value, as you can see in this page: See bending equipment prices.

Useful instructions for copper pipe bending

Here is another interesting article we found, about how to use a copper pipe bender; there are many commonly used applications which require bending the copper pipe, such as heating, plumbing, air conditioning, etc.

These kind of bending machine allow the user to manually bend pipe to the required angle to connect to the system fixtures.

Copper pipe will straighten slightly after being removed from the copper tube bender. It is advised to bend the pipe about 2 to 5 degrees more than the desired angle. It wikk take some practice to get familiar with this process and correctly judge the extra bend angle to use.

Source: How to Use a Copper Pipe Bender | eHow.com http://www.ehow.com/how_5592467_use-copper-pipe-bender.html#ixzz18r1S2H2s

Bending Machines Operator

A bending machine operator sets up and operates machinery constructed to bend metal structural shapes, such as pipes, tubes, bars, rods, angles, to angle or contour according to speficic requirements such as drawings, templates, or layouts: the operator selects and bolts holding clamp, die block, and guide clamp to machine.
Following, are some of the activities due during the daily operations:

• Positioning and clamping end stops on machine to set specified location of bend.


• Screwing or insterting or plug stops into guide wheel to set specified degree of bend.


• Positioning workpiece against end stop. Locking and holding clamp and guide clamp onto workpiece.


• Lubricating workpiece with oil.


• Starting turntable to draw workpiece through guide clamp around die block until stopped by plug stops or until dial indicator points to specified degree of bend.
• Sliding mandrel into tubing instead of using guide clamp.


• Etc

Being the bending industry quite big, it can be easy to find several open positions for this kind, despite this industry has been challenged as many others by the struggling faced this year by western countries economies.
For instance, it is whorth looking at sites such as:
http://ca.indeed.com/Bending-Machine-Operator-jobs